Compost & mulch in the orchard

Things are really greening up around here. It’s so pretty with all the new leaves coming out on the trees. Spring is a neat time of year. Around here it’s also a wet time of year. We received nearly five inches of rain during the last week. The ground is saturated, but it’ll dry out before too long.

There are a lot of jobs that need done around the farm during Spring. I keep plugging away at the things that need done. Last week before some of the rain, we composted all of the blueberry bushes and mulched them with wood chips. I worked the compost into the soil around each bush before putting the mulch around them.

Today, I worked in the orchard. Last year I didn’t give the fruit trees the attention they needed. With plenty of compost available this year, I didn’t want to neglect them again. I was going to till around each tree, but the pull rope on the tiller broke. I’m going to have to fix that and a couple of other things on it tomorrow or the next day.

So, instead of using the tiller, I used a grub how and worked in a circle around each tree, working up the soil out to the drip line of each tree (as far out as the branches extend). There were 14 trees, I think (I forgot to count to make sure). Once I had the ground worked up around all of the trees, I mowed between the trees with the bush hog. Then, I hauled compost to them. I put half a loader scoop at the base of each tree.

I used my grape hoe to spread out the compost. It ended up being 4 or 5 inches deep around each tree. Then, it was time to mulch them. I put a full loader scoop of wood chips at each tree and spread it out beyond the composted area for each one. A few of the trees didn’t need a full scoop of mulch. So, I put the extra around the little hazelnut trees I set out a few weeks ago and a little bit around the cherry bushes.

The orchard looks nice and neat now, and I hope the compost gives the trees a nutritional boost. The wood chips will keep the weeds down and will provide nutrients as the break down over the next year or so.

The Bobcat M500 back together

A few weeks ago, I wrote about working on my Bobcat M500. I had to take it apart in order to pull the engine so I could get the starter off of it. The starter was in need of repair – the brushes were completely worn out. I also had Jack (the local guy who works on starters) check the generator, and it tested out fine, thankfully. That meant that something else was causing it not to keep the battery charged.

While I had the Bobcat taken apart, I cleaned it a bit. It had quite a bit of grease and grime on it. It probably could’ve used a good power washing, but since I didn’t have access to a power washer, I used soapy water, a brush, and a rag. I also purchased some cans of cheap spray paint and gave it a new coat of paint. It was nothing fancy, just something to cover up some of the scratches and places where the metal was bare.

While I had the engine out, I discovered it needed new head gaskets. Amazingly, new ones are still available – Kohler doesn’t support the engine (K662) anymore, but they apparently still have some engines that use the same head gaskets.

After getting the new gaskets installed and the repair starter on it, I completely rewired things. I welded a corner of the operator’s cage which had come apart (it’s home-made by a previous owner) and gave it a new coat of black paint. I also painted the wheels and rear weight red.

Putting it back together went well. I had to replace a few bolts that hold things together. Of course, when I had the engine back in and before I had all the other things put back, I checked to make sure it would start and run okay. It did.

After getting it all back together, I had to run it and check things out. It worked well, but I noticed the batter wasn’t charging. I suspected the voltage regulator, and, when I tested it, it was clear that it wasn’t working (it regulates the voltage from the generator for charging the battery – alternators have built-in voltage regulators). So, I ordered a new one, and when I arrived I put it on. it solved the problem.

The only other problem I had was that the air filter needs replaced. I still have to find one or figure out a way to put new filter material in/on the current one.

Since I got it back together a couple of weeks ago, I’ve used it around here some, and it is quite handy. I’ve moved compost and have loaded some manure and bedding into the truck to haul it to a compost pile. The only complaint I have about it besides that it’s almost underpowered (it is amazingly strong for its size and small engine) is that it drinks gas at an alarming rate. These old Kohler engines aren’t known for being fuel efficient.

Yesterday, I hauled the Bobcat to the stock yard in town. The company that owned the stock yard went bankrupt. So, it’s closed. Anyway, before it closed, the guy who ran the place had the power company tree trimmers dump several loads of wood chips for him to use in their back lots instead of rock (wood chips would keep the cows out of the mud). I liked this idea (it was my idea), because I intended to get the wood chips and manure later on.

However, since the place closed, the pile of wood chips has just sat there looking forlorn and lonely. When I asked, I was told that I might as well get the wood chips if I wanted them. So, I used the Bobcat to load them on my truck and bring them home. I used my smaller truck and trailer to haul the Bobcat, and then after bringing home a small truck load of manure/bedding (all that I hadn’t already gotten – I left it in case anyone else wanted it, but it was still there after four months), I drove my big truck back. I loaded and hauled six loads with the big truck, approximately 72 cubic yards of wood chips.

They’re all piled nice and neat here on the farm, now. It’s very satisfying to push things into a nine foot tall pile for some reason. We’ll use wood chips for garden walkways and to mulch around trees. When I get some more manure, it can be mixed with them. If they’re just left to break down, they’ll make some excellent compost on their own.

Spreading more compost

It didn’t rain last night (there was a chance). So, this morning, I spread compost on the small field near the orchard, at the end of which I planted the 50 asparagus crowns earlier. My compost spreading process involves two tractors, a manure spreader, a loader, and a field cultivator.

This is the field before I started. I disked it a few days ago. Last year, we tried to grow corn here, but the crows and other varmints interfered with that. The soil doesn’t have a lot of humus, appearing to be mostly clay. Like much of the other ground on our farm, it was used to grow tobacco in the past. There were tobacco stalks in it when we moved here almost eight years ago.

I took compost from the piles at then end of the field. Yesterday, I used from one of the piles for spreading on the garden.

The manure spreader that I have is an old one that I bought last spring. Of course, it’s not as old as the one I used before I got this one. I’ve only been able to use this one the last couple of days even though I bought it a year ago. Thankfully, it worked fine today. I pulled and powered it with my 1966 International 424. This has been a very good tractor since I bought it 7.5 years ago. I use it for just about everything.

Part way through the process, I took a photo of my progress. I’d already spread 10 loads at this time, and the first pile was completely removed and I had started on the second pile. I loaded the spreader with the loader tractor. I would’ve liked to have used the Bobcat, but it needs the battery charged. The voltage regulator doesn’t work on it. I ordered another one. Hopefully, that will keep the battery charged.

In all, I spread 13 loads on the field. I estimate each load at around 3,000 pounds. Since the spreader is PTO powered, I ran the tractor in first gear to allow the compost to be spread as thickly as possible. I also went over the same ground at least twice. It’s amazing how little it looks like when it is no longer piled up.

Once I finished spreading, it was time to rip the compost into the soil. I didn’t want to leave it on the surface to dry out and lose some of its goodness. Thankfully, most of the time while I was working it was also overcast.

The field cultivator I used has seven shanks and does a really nice job. This ground was a little harder than the garden I worked yesterday. So, I couldn’t get it to go in quite as deep. Almost as deep though.

It started to rain a little just as I finished working the compost into the ground. I considered that a blessing. It wasn’t much rain, but it was nice to have a little to wet the compost into the ground a bit.

The final photo is of the field after I finished. The soil doesn’t look much darker than before in the photo, but it is a little. It will take several years of working in compost to get it where I would like it to be.

We’ll use this field as a second garden area. I don’t know that we’ll use all of it this year. What we don’t, I hope to sow buckwheat or some other beneficial cover crop on.

Warm and dry in March

Last post I mentioned how we usually warm up and dry out in March. It happened again. We’ve been experiencing summer-like weather for the last few days, and it’s been keeping me busy.

On Sunday I had 50 asparagus crowns to put in the ground. I put lots of compost into the trenches I had already dug and set the asparagus crowns in it. I was able to get them all bedded, and hopefully they’ll be happy.

I also plowed an area for our field corn. It’s not a very big field, but hopefully we can grow enough for corn bread. Last year the crows ate the seed out of the ground and then the raccoons and deer tried to demolish what the crows missed. Hopefully, we’ll do better this year. I’m going to spread a good bit of compost on the soil before it’s time to plant since this particular plot has some poor soil. I actually plowed it a few years ago but didn’t plant anything in it. So, it’s had a bit of a break. I think it previously had tobacco planted in it, as just about every field here has.

Yesterday, I planted the nine cherry bushes that were anxiously waiting to be set in dirt. I put two in front of the house so that we can enjoy their blossoms in the spring. The other seven I set out in a row near the new asparagus rows – they’re on the edge of the orchard. I used the 12” auger on the tractor to dig the holes which was much easier than using a shovel. I dug them deep and put lots of compost in the holes before planting.

Yesterday afternoon I spent working on the manure spreader. I bought the spreader last spring, and the first time I went to use it, the apron chain broke (that’s what walks the material to the back of the spreader). I’ve been needing to fix it, and it’s been waiting patiently. In anticipation of spreading some compost on the gardens, I decided it was time to get it done. I took the chain out, replaced the floor with some new beech boards I had (it had a plywood floor with a few holes).

After buying the necessary hardware and links for the chain, I bolted the floor boards in, repaired the chain, and put it back in. I wasn’t able to try it out until this morning. It seemed to work fine, though. However, on the second load, another link in the chain broke. So, I had to shovel everything out. It occurred to me that at that point, I had shoveled more stuff out of the spreader than it had actually spread for me. I replaced the broken link and made a few adjustments, and then it worked fine.

I spread the pile of manure and bedding we cleaned out of the barn last fall – that was the accumulation from the winter before. Most of that I spread with the loader tractor and a grader blade after the manure spreader broke. I used a friend’s field cultivator to rip the material into the dirt and work up the ground. Then, I spread several more loads of compost from another pile on the garden and ripped it in.

I’ve got another garden area to spread compost on and to work up. If we don’t get much of the rain that’s possible tomorrow, I’ll see about doing that later this week.

Putting plants in the ground

It felt a lot like summer today. Our high was about 80 degrees. We had rain a couple of days ago, but the warmer temperatures and breeze that has been blowing is beginning to dry things out. Usually, there are a couple of weeks in March/April that it dries up enough to work the garden and begin getting some things planted. It’s till too wet to work up our main garden area, but maybe we’re getting closer to that drying period.

I did work in the dirt a bit yesterday and today. A couple of months ago, I ordered some plants. They arrived this week. So, I thought it would be a good idea to get them in the ground.

Yesterday, I planted three Rosa Rugosa plants that Anne ordered free from Gurneys. I planted some in front of the house we lived in before we moved to Kentucky, and we enjoyed them. One of the reasons for getting them now (besides the fact that they were free with the Gurneys’ promotional coupon) is that Rosa Rugosa produce many nice-sized rose hips. We want to harvest them for tea.

Also yesterday, I put six hazelnut trees in the ground. We would like a good nut source. The wild nuts around here are hickory and black walnut. Primarily, we’ve used hickory nuts.

I’ve been digging into one of my compost piles, the smallest one actually, for these plantings. Today, I dug into it a bit more for the strawberry beds. I finished my work on the Bobcat earlier in the week and was able to use it for moving the compost. About three years ago I framed two beds about four feet by 50 feet using some cedar boards and slabs. I added some compost to them and planted strawberries.

We had a few strawberries the next summer, but the deer and weeds were hard on them. Few actually survived. So, yesterday, the boys pulled out all of the old weeds from the beds to get them ready for today. This morning, they dug out the few remaining plants, and I filled the beds with compost. I would say the layer of compost was 6 to 8 inches deep. We then used grub hoes and then the tiller to work it into the soil in the beds a little.

Once the beds were ready, we planted the 100 strawberry plants that arrived two days ago. We also replanted the ones that survived from the previous planting. Later, after they are established, we’ll mulch the plants well to help keep down the weeds. I think weeds are the greatest problem with growing strawberries.

We still have 50 asparagus crowns to put in the ground and some cherry bushes, too. This afternoon, I disked the area where we tried to grow corn last year. At one end of it, I used the turning plow to dig two ditches. On Sunday, we’ll put compost in the ditches and plant the asparagus in them. We’ll also put the cherry bushes in the same area – it’s actually on one side of our small orchard which seems like a good place.

Later, I’ll put compost on the ground I disked today. We’ll use it for garden along with the main area in front of the new house which will also receive as much compost as I can spread on it. I can see already that I won’t have enough compost and that I need to haul in a lot more stuff.

We’re enjoying the spring weather, for sure. Next week, we ought to be able to get the cows out of the barn and back on grass. They’ll appreciate that, I’m sure. It’s really nice to see things greening up and the early spring flowers. One of our plum trees just bloomed today. There will be a lot more blooms on other trees soon.

Some hay, some snow, and a new banjo

Some of you may wonder where I’ve been. The answer is, no where really. I just haven’t posted in quite a while. I do intend to rectify that, and this post will be the beginning.

Things on the homestead are going well. It’s winter now, so some things are slower. The fewer daylight hours and weather affect how much time I spend working on different projects outside. There are chores to be done every day. So, I get out rain or shine at least twice a day.

I moved the cows to the barn just before Thanksgiving. I put it off as long as I could. The limited amount of rain that we had during the summer months affected how the grass grew. I could probably have kept them out on grass for another two weeks, but we were planning on going to North Carolina to visit family for Thanksgiving. Since my dad was going to take care of my chores, I wanted to simplify the process as much as possible, and having the cows in the barn provided that simplification.

I bought a few more bales of hay in order to ensure I have enough to last through the winter months. Usually, we are able to bale enough to feed the animals until grass greens up in the spring, but I only had two cuttings of hay this summer. Also, I was pasturing the cows on part of the ground I usually hay. I hope to not feel a need to buy any next year.

This winter started early with colder temperatures and snow. We’ve had more snow already than we’ve had many winters. We’ve also had temperatures 10 to 20 degrees below normal. It snowed again last night. So, we woke up to a beautiful, white snowscape. For some, I’m sure, the snow was welcomed as a special blessing augmenting their Christmas celebrations. We don’t celebrate Christmas, so it didn’t add any specialness in that regard. It does add some visual beauty to the Sabbath, though!

I’ve not brought home any new composting material for several weeks. The large corporation that owns the local stock yard had some financial trouble and wrote nearly 100 million dollars worth of bad checks (not just here, but in the 11 states in which they have facilities). So, the local facility hasn’t been open for business since before Thanksgiving. I don’t know if it will reopen. Besides, the ground has been wet and muddy which would make hauling anything problematic.

I bought a banjo with the intention of learning to play. It’ll take a while, I’m sure, but I’ll learn. It would be great to just be a good banjo-player, but there’s a process for becoming one. I can’t skip the process. I’ve found some good resources online. I’m learning a lot from Patrick Costello who has written a few books (which are available through Amazon or for free download) and has a ton of instructional material available online, including a lot of YouTube videos. I bought a Gold Tone CC-OT and am learning frailing/clawhammer banjo. Whenever my skills are good enough, I’ll share some of my playing in a video or two. It may be a few months!

I already play the guitar some. I bought a guitar seven years ago and taught myself how to play. I’m not that good with it, but I’m learning more along with my banjo learning. I’d like to be able to play the guitar better, too. So, hopefully, I’ll become relatively proficient on both instruments.

Well, ya’ll stay warm. I’ll try to keep you updated more regularly on the goings on at our place.

Compost, garden, and blackberries

I hauled two loads of composting material from the sale barn yesterday. It looks like some nice stuff. I dumped it behind the ridge at the end of the pile I built back there a few months ago. Using the loader tractor, I was able to push it all up together. Now, we’ll let our little bacterial friends do their work, turning the material into black gold, ready to enrich the soil and grow awesome gardens next year!

The original pile I built behind the ridge has shrunk in size quite a bit during the few months it’s been there. We planted some watermelon at its base a few weeks ago which are coming along fine. We planted some butternut squash at the base of another small pile. It’s looking happy.

I thought I’d share a photo of our poor stand of field corn. We were able to hoe a lot of the weeds and grass out of it last week. I still ought to run the tiller between the rows to get rid of a few more weeds and grass. I hope to be able to get at least enough corn out of it for next year’s seed. I hope the crows aren’t a problem again.

Before lunch yesterday, I went out to pick some blackberries. It’s that time of year. With all of the hot weather and lack of rain, it looks like the berries are going to ripen within a short period of time. My dad has been out a few times to pick berries, and he came along and picked with me and gave us the berries! He’s kind like that. Anne canned nine quarts of blackberries after we brought them in.

 

A welcome rest at the end of the week

It’s been a good week. Lots of work. I’m glad that it’s the end of the week and we have a day of rest – a welcome respite every week. Normally, I don’t like to post without photos, but I decided to go ahead tonight, mainly because I didn’t take any pictures this week.

On Monday, my friend Jon came over (he’s coming over on Mondays and Wednesdays to work with me), and we dug footers for the porch and kitchen on the new house. We also planed some boards that will be used for the upstairs subfloor.

On Tuesday, the children and I worked in the garden. The potatoes were really needing weeded. The children worked on weeding Monday and Tuesday. Then, I tilled between the rows. The potatoes in this particular plot haven’t done as well as I would like. I think the wet weather after they were planted didn’t help. In the morning on Tuesday, I also bought 100 80-pound bags of concrete mix in order to be ready for pouring the footers on Wednesday.

Wednesday morning was the scheduled delivery for our coop order. Thankfully, Danny offered to get it for me. I had a few things to do to be ready for when Jon arrived. Once he got here, we began mixing and pouring concrete. Thankfully, I bought an electric powered concrete mixer from Lowes a few weeks ago when we started working on the cistern again. It worked great powered by my Yamaha generator (which is so quiet you couldn’t hear it over the noise of the mixer).

We started with the footer for the kitchen. I ran the mixer while Jon dumped the concrete and tamped it down. It took 54 bags to finish it, mixing two at a time. We used three bags of concrete for each of the porch footers (one for below each post). The mixer was just able to hold three bags worth, and we were able to position the mixer for each one so that we could dump straight into the hole. It all went very smoothly. We mixed 98 bags of concrete and got the job done. I was a little tired at the end of the day!

On Thursday, I cut some wood for the cookstove, and then the children and I worked in the garden. We planted some sweet corn, more green beans, zucchini squash, and cantaloupe and set out another 100 sweet potato slips (we now have 300 sweet potato plants growing). I also bush hogged where the cows have grazed during the last two weeks, mixed some manure with wet hay, adding to one of the compost piles, and tilled the field for growing beans and squash. The children and I ended the day with a swim in the pond, the same as we did on Monday and Tuesday.

Today, I replanted the corn field because it looks like only about 1/3 of the corn we planted two weeks ago came up. I don’t know why it didn’t germinate well. It may have been too wet. I do know that crows ate a good bit of it right out of the ground. I used the garden planter to replant today. It took a bit of work since I didn’t work the ground first (I didn’t want to disturb the corn plants already up). Hopefully, what I planted today will germinate and grow well with little interference by pesky crows.

I also planted our dried bean seeds. The rows in this field are 80 feet long (give or take 15 feet). I planted 4 rows of small kidney beans, 12 rows of pinto beans, 12 rows of red beans, and 12 rows of horticulture beans. I also planted several kinds of winter squash, some pumpkins, okra, and cantaloupe. Then, this afternoon, I went to town and bought some concrete blocks and mortar mix to be prepared for more work on the new house on Monday.

Oh, I also completed some class work (I’m teaching a six-week section during the summer session) in the mornings before everyone else got up. There are a few other things I did during the week, but the ones I’ve mentioned are the major ones. It was a good week with lots of things accomplished, and I’m glad that it’s Sabbath now!

General update: rain, compost, & cows

It’s a beautiful spring on the homestead. We’re keeping busy, of course. There are always more projects to do than it seems possible to get done.

There is still a lot of gardening to be done. We got in some early stuff a few weeks ago like potatoes, salad greens, onions, and peas. I’ve been waiting until May to put in the other things like tomatoes, peppers, squash, sweet potatoes, etc. We had some much needed rain(three inches) a week and a half ago. This last weekend we received another 11 inches of rain, 8 of them during the day on Sunday. That was more than we needed in such a short period of time. We didn’t have any flooding here, but the small river in the local town flooded several places.

One of the blessings of the flooding in town has been a lot of extra composting material to be hauled from the sale barn. They were underwater, five or six feet deep in places, on Sunday. So, they’ve had to clean out everything. They called me yesterday morning to ask me to help haul away wet hay and manure. I hauled yesterday afternoon, all day today, and will be hauling more tomorrow. The guy who regularly hauls off their manure and bedding brought out several loads today, too. So far, I’ve put together a nice little compost pile.

On April 28 Josey, our Guernsey, had a calf. She was due to freshen by the end of April, but she just didn’t look pregnant. Even though she hadn’t been in heat, I began to wonder if she was actually going to have a calf. She had a little bull calf. We let it nurse for the first 2 or 3 days and then took it off to bottle feed it. It still gets milk from Josey, not milk replacer. I would have left him with Josey, but I don’t want weaning problems later on. She never weaned her last calf, and he was 20 months old when we butchered him. Ramiah named the new calf Smokey.

I also finally got the cows out of the barn and back on grass this week, Monday evening actually. I was regularly cutting them fresh grass to eat every day for a while while they were still in the barn. One of the things that made it so late for getting them out was preparing the milking shed. I don’t want them coming back to the barn to be milked. It’s too far from their pasture and creates other problems because I need to be able to drive where the fence would need to go.

I had already built a shed to use as a milking shed a couple of years ago, but I had never put it to that use except for a brief period of time last summer. I’ve fenced in a small area to hold them at milking time and constructed a milk stanchion. It’s worked pretty well so far this week.

One of the things I’m doing this summer is rotating the cows onto new grass each day. In fact, my goal is to rotate them twice a day. Since I have to milk them twice a day, I will bring them into the loafing area, milk them, and then put them in a new paddock. I’m going to make use of fenced corridors from which they’ll access paddocks I’ll fence off. While they were in the barn, I fed them hay twice a day, morning and evening. It seems to make sense to give them fresh grass to each on the same schedule, kind of like green hay still on the plant.

One of the challenges for me in terms of intensive rotational grazing has been water. This summer I’m going to haul water from the pond in a tank to fill a trough for the cows. Their water trough will be in the corridor so that I don’t have to move it and so that they will have access to it.

So far, Josey, Tilly, and Buster (our beef steer) have been on four different paddocks. You can see how they grazed today’s paddock (photo to the left). They were happy to have fresh grass this evening. Moving them twice a day won’t create much more work than moving them once a day since I have to bring them in for milking anyway. I’m hoping that it’ll work out well.

First load with the new truck!

We spent a few days with Forerunner and his family, arriving home Tuesday evening after a GREAT visit. Yesterday, I had a few things to work on, but the urge to haul compost material was strong upon me. Have you noticed that composting has become ‘important’ to me? (We won’t call it an obsession – maybe a passion, though.) So, I acquired the necessary materials to build a tailgate for the new truck. Construction of said tailgate began immediately and was finished (except for paint) this morning. Ain't she a beauty?



As soon as I finished the tailgate and checked the rear end shifter on the truck, I set off to town in hopes of bringing home a nice load of material from the sale barn. I was not disappointed.



Unloading was easy.





Empty in a matter of minutes (except for the 2x6 Malchiah threw in the back after removing it from the material -- whatta boy!).



I was very pleased with the amount -- at least twice as much as I can haul with my other truck and trailer, and I haven't even built the side boards yet.



There's one more load to haul after lunch, but I'm wishing there was more. . .

Increasing my hauling capacity

I brought home another piece of equipment this morning. I’ve acquired several things to make my composting endeavors more efficient. With my F250 and trailer, I’ve been able to haul about 5 tons of material per trip. Now, I expect I should be able to haul 10 to 12 tons per trip with my new truck:



It’s not brand new, of course. It’s a 1981 Chevrolet 2-ton truck with a 16 foot dump bed. I have to do a few things to it, like put on different tires (I have a source for some good used ones), build some extensions to raise the height of the sides, and construct a tail gate. I’m itching to put it to use.

The joy of composting

Last Friday I made five trips and hauled in about 25 tons of cleanings from the sale barn in town. With the manure/bedding and sawdust I already had hauled in, I went ahead and put together two more compost piles (I already had one built).


On Sunday morning, the piles were vigorously steaming. So, yesterday I took my camera with me when I went to do my chores so I could photograph the beauty of steaming compost piles in the early morning.
 
Now it’s time to haul in a lot more material and keep building compost piles. We’re making a trip to Illinois later this week. So, it will be next week before I can haul more. It’ll be hard waiting that long. . .

Carbon material

Earlier in the week, I stopped and spoke with an Amish man who has a small sawmill at his dairy, inquiring about getting saw dust from him. He was happy to continue letting the gentleman who cleans up for him take care of it. When I got home, Anne said she had good news: a friend had dropped by to chat for a while, and she said that we could get saw dust at a small saw mill in Marrowbone. Well, I was busy working on a project Tuesday and Wednesday, so I couldn't get to the mill to see about acquiring saw dust until today.

This mill is only 10 miles away mostly across country roads. The guy in the loader said that I could help myself to the saw dust and take all I wanted, when I asked him about it. He didn't offer to load it, and I didn't ask him. As I show up for loads regularly, he may be more willing to load, but I'm not afraid of manual labor (working a shovel). Thankfully, I had taken the scoop shovel. I was able to back the truck right up to the pile to load it which didn't take long.
After unloading here at home, we (my good friend Danny was with me) hooked up the trailer and headed for another load.

 
The pile of sawdust is gorgeous. Apparently, when the pile gets too high, the push the saw dust back away from the auger that unloads it.

 

There's another pile of chipped bark from their debarking machine. We loaded the trailer with this material and then filled the truck with saw dust.

 
I took another photo with the trailer loaded. We used pitch forks for loading this material, and that worked pretty well.

 
Here’s a photo of the truck loaded with saw dust. We covered the load with the tarp so that not too much of it would blow away. Notice the dark material in the background: that's where they have pushed the saw dust and chipped bark in the past and let it sit. I'll have to ask about acquiring some of that good looking stuff, too. . .

When we got home, it was time to employ the "burrito-method" of unloading to get the material off of the trailer. It unloaded great.

 
The trailer load dumped right on top of the first load of saw dust.

 
Here's the carbon material we hauled today in two trips.

In the morning, I'm heading in the opposite direction to haul home some more material from the sale barn. They cleaned out some of the back lots today, and I want to get some of that back here. If that hauling goes well, I'll haul three or four loads of carbon material in the afternoon. Then, this Sunday, after a nice rest on the 7th day, I'll build a beautiful compost pile.

I bought a new tractor (as I mentioned in my previous post). Here is a photo of it:

 
It’s a 1976 Case 990 with a loader. The loader has been well used, broken, and repaired, but it’ll work for my purposes. It’s like having 100 men with shovels and pitchforks ready and willing to work for me, something not to be taken for granted. It's a great tool.

I’m thrilled about having a source for carbon material. It’s one more step toward extreme composting!